FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: hardheadpdb on September 13, 2018, 03:02:48 PM

Title: Harmonic balancer
Post by: hardheadpdb on September 13, 2018, 03:02:48 PM

Need some information on what balancer is best suited
Engine is a 390 with 428 crank
60 over with flat top piston 0 deck height
Big hydraulic roller 660 on lift
Aluminum heads t&d rockers
Fe adaptor with tunnel ram
Dual quads Fitech 1200
In a 64 falcon with 456 gears
Suggestions would be appreciated
Thanks

Title: Re: Harmonic balancer
Post by: fekbmax on September 13, 2018, 03:31:47 PM

Innovators west

Title: Re: Harmonic balancer
Post by: JamesonRacing on September 13, 2018, 07:05:22 PM

Quote from: fekbmax on September 13, 2018, 03:31:47 PM

Innovators west

I have IW balancers on two engines.  Race engine has the crank trigger built into the balancer.  Very nice parts.

Title: Re: Harmonic balancer
Post by: George vega on September 14, 2018, 08:02:41 AM

X2 on Innovators West. Been using one for years with no issues.

Title: Re: Harmonic balancer
Post by: jayb on September 14, 2018, 09:16:01 AM

I like ATI balancers, have always had good luck with them. 

Title: Re: Harmonic balancer
Post by: hardheadpdb on September 14, 2018, 10:51:01 AM

Greatly appreciated  guys
No matter how much experience you have
It’s allways good to ask

Title: Re: Harmonic balancer
Post by: Barry_R on September 14, 2018, 12:17:29 PM

We use ATI on race stuff

Romac on street/strip deals

Powerbond on street cruisers