FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: rj4004 on August 16, 2018, 07:06:48 PM

Title: 67 Fairlane FE shorty header choices
Post by: rj4004 on August 16, 2018, 07:06:48 PM

Wondering if there are any shorty headers that FIT 67 Fairlane c4 no power steering application.

Anybody have any positive experience with this I would appreciate your input.

Thanks RJ

Title: Re: 67 Fairlane FE shorty header choices
Post by: cattleFEeder on August 16, 2018, 10:11:40 PM

These Ford powertrain,  in a 66 there not shorties but no better fit.
http://www.fordpowertrain.com/

Title: Re: 67 Fairlane FE shorty header choices
Post by: FERoadster on August 16, 2018, 11:16:52 PM

Not a 66-7 Fairlane but 1959 T-Bird. I did put a set of the FPS's made for the car and a no denting needed install. Great workmanship and quality materials. But I had to pay for the quality. I'd use them again.

Richard >>> GERoadster

Title: Re: 67 Fairlane FE shorty header choices
Post by: manofmerc on August 17, 2018, 04:26:41 AM

If you go back a couple of pages I have a post on installing a set of hedman headers or my 66 comet .They fit pretty good and aren't as expensive as the FPAs .I haven't seen a set of shortys for a shock tower car .That doesn't mean they aren't available .Check with sanderson they make shortys for FEs .Doug

Title: Re: 67 Fairlane FE shorty header choices
Post by: JamesonRacing on August 17, 2018, 06:24:06 AM

I have a set of stainless shorty headers that are intended to be 428CJ manifold replacements.  Was going to use them on a project, but plans have changed.  Made in China, but look pretty decent.  PM if interested.