FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: Drew Pojedinec on July 25, 2018, 02:16:51 PM

Title: WTB SBF 302 intake
Post by: Drew Pojedinec on July 25, 2018, 02:16:51 PM

So Ronin is getting his permit when I get home next time.

We've been driving his truck around a little and the 2v Autolite carb needs a rebuild.  I've got probably 100 1850's on the shelf.  I'd rather have him rebuild one of these as I have so many Holley parts laying around, in the future while I'm gone he can grab a gasket or accelerator pump as needed, etc.

I told him for his birthday I'd get him a 4v 302 intake and teach him to rebuild the 1850 or even one of the 390cfm carbs I've got laying around.

Not looking for anything fancy, It's just a stock junky engine, aluminum would be super nice just because I hate lifting heavy stuff.  It can be ugly, we can soda blast it if needed.
I figure someone here probably has an intake with some spiders ready to hatch that has been on the shop floor for a decade.
To narrow down the field, lets put a $125 shipped budget out there.


Thanks,
Drew

Title: Re: WTB SBF 302 intake
Post by: Fordman on July 26, 2018, 03:20:46 PM

Drew....I have a stock '85 mustang 4V aluminum intake. depending on shipping I also have an edelbrock performer, Chinese polished rpm style intake as well but like I said shipping can be brutal these days. My email is classics4everyone at yahoo.ca
Thanks...John

Title: Re: WTB SBF 302 intake
Post by: Stangman on July 26, 2018, 11:27:39 PM

jegs has a 302 rpm for 139 brand new, a little more than you said but new. Free shipping.

Title: Re: WTB SBF 302 intake
Post by: Drew Pojedinec on July 27, 2018, 07:26:58 AM

Yeah that is why I set that limit

Title: Re: WTB SBF 302 intake
Post by: cattleFEeder on July 27, 2018, 12:58:09 PM

https://www.ebay.com/itm/Edelbrock-5435-F-28-Dual-Quad-Intake-Manifold-Ford-289-302/292651321030?fits=Make%3AFord&epid=179181625&hash=item442360c6c6%3Ag%3ADjgAAO
Here you go , break him in rite with dual quads. What could possibly go wrong with that.

Title: Re: WTB SBF 302 intake
Post by: urchinhead on July 29, 2018, 09:41:56 AM

I am interested in buying a new one and sending it your way in exchange for some future plating work, if that appeals to you. The only small block manifolds in my garage are fuel injected.

Title: Re: WTB SBF 302 intake
Post by: Drew Pojedinec on July 29, 2018, 11:20:56 AM

If that is the case Mike, I’ll just buy a new one and we’ll work out the details later

Title: Re: WTB SBF 302 intake
Post by: urchinhead on July 29, 2018, 12:41:10 PM

I can use my Discover points to get one, just give me a heads up what you might want. I’m going through the remaining Galaxie linkage right now, and have been tinkering with some truck parts this weekend.

Title: Re: WTB SBF 302 intake
Post by: wayne on July 30, 2018, 05:58:01 PM

I got a iron 4v or a 84 mustang gt  for 25 plus shipping.

Title: Re: WTB SBF 302 intake
Post by: cattleFEeder on July 30, 2018, 07:41:07 PM

https://www.ebay.com/itm/Ford-289-Holly-Street-Dominator-Manifold-NEW/123229612586?
This might work its supposed to be brand new.