FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: 64CustomP on June 26, 2018, 04:55:26 PM

Title: Carb linkage on M/T cross ram
Post by: 64CustomP on June 26, 2018, 04:55:26 PM

Im looking for carb linkage pics on Mickey Thompson cross ram FE intakes.  This is getting installed in a 64 Gal. but all pics are welcome.  need ideas or proven combos.  Chris   513-9O7-1931

Title: Re: Carb linkage on M/T cross ram
Post by: FERoadster on July 03, 2018, 09:50:50 AM

Finally got home to take a picture of my M/T intake will post later today.

Richard

Title: Re: Carb linkage on M/T cross ram Photos
Post by: FERoadster on July 04, 2018, 09:59:53 AM

Quite rudimentary linkage
I can get additional measurements if you need them


Richard >>> FERoadster

Title: Re: Carb linkage on M/T cross ram
Post by: 64CustomP on July 05, 2018, 10:16:45 PM

Thanks for the pics.  I like the look of that setup.  I took the easy way out and found a kit from Dale Wilch eBay store.  I wanted something vintage looking like yours but I'm trying to get this thing done.  I can change linkage out later. 

I'm curious, what application was your setup in with that throttle lever so far on passenger side?

Title: Re: Carb linkage on M/T cross ram
Post by: FERoadster on July 06, 2018, 08:59:51 AM

I don't know what it came off. I just found it while asking around. $400 price tag was nice.
The throttle linkage arm seems to have been moved and rewelded.

Richard

Title: Re: Carb linkage on M/T cross ram
Post by: gdaddy01 on July 06, 2018, 05:33:45 PM

maybe someone stuck a 427 into a six cly. falcon back in the day ?   I think the throttle rod went across the firewall to the passengers side .