FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: hwoods on June 12, 2018, 04:35:43 PM

Title: FE Intake Manifold Question
Post by: hwoods on June 12, 2018, 04:35:43 PM
Has anyone ever milled out the head side of the pushrod tube, so that you can remove an FE intake manifold with out pulling the push rods?
Title: Re: FE Intake Manifold Question
Post by: hwoods on June 12, 2018, 04:36:42 PM
probably can't do it? but has anyone tried?
Title: Re: FE Intake Manifold Question
Post by: Heo on June 12, 2018, 04:53:41 PM
I think you get to small area for the gasket to seal
Title: Re: FE Intake Manifold Question
Post by: blykins on June 12, 2018, 05:57:59 PM
You will hit water in the front.
Title: Re: FE Intake Manifold Question
Post by: badcatt on June 14, 2018, 01:43:26 AM
I have seen an adapter that one can use a 351C intake on. The one I saw had a tunnel ram intake on it. Maybe someone knows more about them and can add in here.
Title: Re: FE Intake Manifold Question
Post by: Heo on June 14, 2018, 01:55:28 AM
Quote from: badcatt on June 14, 2018, 01:43:26 AM
I have seen an adapter that one can use a 351C intake on. The one I saw had a tunnel ram intake on it. Maybe someone knows more about them and can add in here.
Huh ??? wounder where you can buy that?  ;D
Title: Re: FE Intake Manifold Question
Post by: jayb on June 14, 2018, 03:48:06 PM
Quote from: badcatt on June 14, 2018, 01:43:26 AM
I have seen an adapter that one can use a 351C intake on. The one I saw had a tunnel ram intake on it. Maybe someone knows more about them and can add in here.

LOL!  Really??

http://www.fepower.net/Products/feiamr.html
Title: Re: FE Intake Manifold Question
Post by: Pentroof on June 14, 2018, 04:37:01 PM
Quote from: badcatt on June 14, 2018, 01:43:26 AM
I have seen an adapter that one can use a 351C intake on. The one I saw had a tunnel ram intake on it. Maybe someone knows more about them and can add in here.

Welcome to Jay's site....
Title: Re: FE Intake Manifold Question
Post by: cjshaker on June 15, 2018, 12:20:49 AM
Quote from: badcatt on June 14, 2018, 01:43:26 AM
I have seen an adapter that one can use a 351C intake on. The one I saw had a tunnel ram intake on it. Maybe someone knows more about them and can add in here.

Kinda like this?

(https://s19.postimg.cc/710dd6tub/PSE.jpg) (https://postimages.org/)
Title: Re: FE Intake Manifold Question
Post by: badcatt on June 28, 2018, 03:02:54 PM
Quote from: cjshaker on June 15, 2018, 12:20:49 AM
Quote from: badcatt on June 14, 2018, 01:43:26 AM
I have seen an adapter that one can use a 351C intake on. The one I saw had a tunnel ram intake on it. Maybe someone knows more about them and can add in here.

Kinda like this?

(https://s19.postimg.cc/710dd6tub/PSE.jpg) (https://postimages.org/)
Eggactly.
Title: Re: FE Intake Manifold Question
Post by: hyper64 on June 29, 2018, 11:37:17 AM
Or this
Maybe someday I'll figure out how to post the image correctly!!!!
Title: Re: FE Intake Manifold Question
Post by: gdaddy01 on June 29, 2018, 11:05:20 PM
boy , I would like to have one of those , no wait , I do , got mine for Jay Brown , FE forum .