FE Power Forums

FE Power Forums => Member Projects => Topic started by: millerptl on June 05, 2018, 07:32:57 PM

Title: Dragweek 2018 project in progress
Post by: millerptl on June 05, 2018, 07:32:57 PM

(http://farm2.staticflickr.com/1721/28731115048_08fcda37e3_b.jpg)

Drag Week 2018 Project in progress.

Title: Re: Dragweek 2018 project in progress
Post by: jayb on June 05, 2018, 07:57:21 PM

Looking good!  Are those billet heads?

Title: Re: Dragweek 2018 project in progress
Post by: millerptl on June 05, 2018, 08:03:10 PM

Yes sir!!

Title: Re: Dragweek 2018 project in progress
Post by: CaptCobrajet on June 05, 2018, 08:23:39 PM

Looking good fellers!!

Title: Re: Dragweek 2018 project in progress
Post by: Tommy A on June 06, 2018, 08:01:57 PM

Wow Mr.Jack look'n good... is that somemore 'BP' power?? Also did ya'all get the rear end figured out in Scotts cougar?? .... I'm the guy that bothered you, Scott and Eugune @ every track @ drag week last year..........Tom

Title: Re: Dragweek 2018 project in progress
Post by: cjshaker on June 06, 2018, 08:04:54 PM

Quote from: jayb on June 05, 2018, 07:57:21 PM

Looking good!  Are those billet heads?

Quote from: millerptl on June 05, 2018, 08:03:10 PM

Yes sir!!

Wow, stepping up the game a bit I see!! I'm not gonna ask for numbers, but I assume the engine was dynoed with the new heads?

Title: Re: Dragweek 2018 project in progress
Post by: millerptl on June 08, 2018, 03:15:29 PM

Have not dyno'd my dad's mustang yet. My cougar hasn't had a thing done except for putting steel rockers in it. I will take the wheelie bars off and try again.

Title: Re: Dragweek 2018 project in progress
Post by: scott foxwell on June 09, 2018, 03:07:06 PM

Is this FE based?
Curious why you kept the injectors low in the intake like that...

Title: Re: Dragweek 2018 project in progress
Post by: jayb on June 09, 2018, 03:59:29 PM

Jack Miller and his son Scott are well known FE racers.  I'm guessing that the heads are the billet canted valve FE heads that are available from a certain source...

Title: Billet, like these:
Post by: machoneman on June 09, 2018, 04:24:52 PM

http://www.fordmuscleforums.com/all-ford-techboard/481127-billet-canted-valve-fe-head.html

Title: Re: Dragweek 2018 project in progress
Post by: bobb428 on June 10, 2018, 09:41:24 PM

So awesome to see another set of those on a engine! Exciting to see the results!

Title: Re: Dragweek 2018 project in progress
Post by: bluef100fe on June 21, 2018, 05:28:05 AM

Always loved that car! Going the N/A route this time? I'm Hoping to hear you get some nice results. Sadly I won't be attempting dragweek in 2018... maybe 2019... good luck to the Millers.