FE Power Forums
FE Power Forums => FE Technical Forum => Topic started by: Heo on May 31, 2018, 03:39:24 AM
-
Anyone that knows if the enginemounts that bolts to the
Chassie is the same on FE Galaxie/Fairlane -66.
Boltpattern looks very similar if my memory serves me
right about the Fairlane?
-
https://autokrafters.com/p-3275-engine-frame-mounts-66-69-fair-390-427-428.aspx
They look different, stuffing an Fe into a 66 Fairlane brings about lots of adult non English words.
-
Those are fabricated mounts and they look different but
wounder how factory mount looks like.
I see now the BP is not symetrical while the Galaxie is
Yes i had one 66 with a fe instaled by......Bubba
had to re do everything and i used so much adult language
that i washed my toung with soap my self ;D
Stepson bought A 66 and eventualy it gets a FE
and i had a set of Galaxie mounts and i think they can fit
thinking of it the mounts i made should be somewhere ???
-
I have a set of FE mounts from my 67 Fairlane if you need them. Frame mounts and motor mounts. I went with aftermarket.
https://www.ebay.com/itm/FORD-FAIRLANE-CYCLONE-COMET-GT-390-427-SIDE-OILER-428-SCJ-RACING-MOTOR-MOUNTS-FE/292547694036?hash=item441d338dd4:g:EcQAAOSwll1W1KNy
-
Motor plates 8)
-
Motor plates 8)
There was a time when i had said lets gut i and build a tubechassie ;D
You need 16/33 slicks and ....today i get tired just thinking about it
been there done that just to many times
-
Thanks for the offer Scott, I tell him he have to decide what
engine to use and let you know if he make the right move
Do you have a pic of the frame mount so i can compare
with the Galaxie mounts i have? I saw now the Galaxie
mount have asymetrical BP to. No need to send them
halfway around the world if i have mounts he can use
-
Motor plates 8)
There was a time when i had said lets gut i and build a tubechassie ;D
You need 16/33 slicks and ....today i get tired just thinking about it
been there done that just to many times
LOL, only half kidding - I intend to make some plates for the Falcon and the 351C, just because it'll be quicker and easier to R&R the motor/trans. No chassis mods other than brackets for the plates.
-
Yes much easier to get the engine in and out with plates and...
That front end with shocktowers is heavy....and easier to build
headers with out innerfenders.. ;D ;D it has a tendencies to snowball
He just want a cruiser with some extra power
-
Thanks for the offer Scott, I tell him he have to decide what
engine to use and let you know if he make the right move
Do you have a pic of the frame mount so i can compare
with the Galaxie mounts i have? I saw now the Galaxie
mount have asymetrical BP to. No need to send them
halfway around the world if i have mounts he can use
I'll get some pics this weekend. No problem.
-
Thanks for the offer Scott, I tell him he have to decide what
engine to use and let you know if he make the right move
Do you have a pic of the frame mount so i can compare
with the Galaxie mounts i have? I saw now the Galaxie
mount have asymetrical BP to. No need to send them
halfway around the world if i have mounts he can use
Sent you some pics....