FE Power Forums

FE Power Forums => Non-FE Discussion Forum => Topic started by: whitea62.7t on April 26, 2018, 05:00:03 AM

Title: help
Post by: whitea62.7t on April 26, 2018, 05:00:03 AM

I can't find .100 longer valves for a set of trick flow 11r heads for a 363 build
does anyone know how much custom SS valves cost and how long turn around is?
Thank you
Sean

Title: Re: help
Post by: blykins on April 26, 2018, 07:16:47 AM

I can help if you give me a yell. 

I'd need to know what kind of valves you're looking for (standard stainless, hollow stem, titanium, etc.) and the current lengths. 

Title: Re: help
Post by: whitea62.7t on April 26, 2018, 09:13:01 AM

I need 5.3  length 8mm stainless valves for trockflow 11r 205 heads
2.08 and 1.6

Title: Re: help
Post by: cammerfe on April 26, 2018, 09:33:21 AM

If you have suitable valves and are only looking for others due to length, lash caps will be a satisfactory solution.

KS

Title: Re: help
Post by: whitea62.7t on April 26, 2018, 09:39:54 AM

I'm .100 short on installed height , .718 gross lift solid rollee

Title: Re: help
Post by: blykins on April 26, 2018, 09:54:25 AM

Custom valves will be around $700-800 at first glance. 

What about a +.100" retainer?

Title: Re: help
Post by: whitea62.7t on April 26, 2018, 11:27:45 AM

We need spring height for the lift , don't understand how a thicker  retainer would help,I'm still learninh

Title: Re: help
Post by: blykins on April 26, 2018, 12:02:16 PM

It's not a thicker retainer.  It's a retainer that gives +.100" extra install height. 

You can also use a +.050" valve lock.  More than one way of getting there without buying valves.

Title: Re: help
Post by: whitea62.7t on April 26, 2018, 12:59:25 PM

Thank you very much for the info