FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: billtroth on April 22, 2018, 11:19:53 AM

Title: Parts for sale at FE Race and Reunion
Post by: billtroth on April 22, 2018, 11:19:53 AM

I'm rushing to get ready for Beaver Springs so no time to post pictures and more than quick information. I wanted to at least get this post done so send me respond with questions and I will try and respond.  I'll also have some other odds and ends I will bring and if there's anything you might be looking for also let me know.   
Complete 2x4 Tunnel wedge system:
·         Dove tunnel wedge intake manifold.  Not cut or ported.  Like new
·         2 Holley 4160 600 c.f.m. carbs. With milled choke horns rebuilt by
·         Linkage for a above
·         Fiberglass bonnet for headlight air induction
·         6” tubes to connect to headlight opening.
Race ready C-6:
·         Reverse manual valve body
·         Aluminum pan
·         Heavy duty steels , clutches and internals
Steel driveshaft for C6 install in 63/ 64 Galaxie:
·         Spicer 1350 yoke to fit C6
Two FE crank shafts
·         One U1B 428 needs some cleanup
·         One stock 390
Miscellaneous:
·         Plastic fuel cell
·         Chrome valve covers
·         More than a dozen radiator expansion tanks.

I've got quite a bit of FE / '64 Galaxie parts I have accumulated over the last 16 years so if you are looking for something specific let me know.