FE Power Forums

FE Power Forums => Non-FE Discussion Forum => Topic started by: 427HISS on April 08, 2018, 04:06:45 PM

Title: March Performance OR CVF Racing Pulley's ?
Post by: 427HISS on April 08, 2018, 04:06:45 PM

Going to buy a new set of engine pulley's, alternator only. I want to try the 6 or 8 rib serpentine system.
I've had March's before but not CVF's.

Any paticular reason's for choosing one company over the other ?

Title: Re: March Performance OR CVF Racing Pulley's ?
Post by: cattleFEeder on April 08, 2018, 05:35:41 PM

CVF pulleys are good quality, Midwest made and cheaper. But cant go wrong with either.

Title: Re: March Performance OR CVF Racing Pulley's ?
Post by: rcodecj on April 08, 2018, 06:18:36 PM

I've only used March and they fit perfect. That said next time I would definitely try CVF for the price.

Title: Re: March Performance OR CVF Racing Pulley's ?
Post by: 427HISS on April 08, 2018, 07:22:21 PM

CVF is about 40 bucks less. The brackets are almost the same.

Top is CVF

Title: Re: March Performance OR CVF Racing Pulley's ?
Post by: cammerfe on April 08, 2018, 10:15:40 PM

Until The March brothers moved to Florida, they were a local outfit. I knew them, not well, but their stuff is absolutely top-notch. And they are good guys. They make stuff for all makes, but they're FORD people. That's good enough for me!!

KS

Title: Re: March Performance OR CVF Racing Pulley's ?
Post by: 427HISS on April 09, 2018, 09:15:56 AM

Good to know. $40 isn't enough not to buy. I can look, but do you know if CVF is made in thr USA ?

Title: Re: March Performance OR CVF Racing Pulley's ?
Post by: cattleFEeder on April 09, 2018, 11:48:58 AM

Yes it is US made, all of the cnc machine of pulleys and brackets.

Title: Re: March Performance OR CVF Racing Pulley's ?
Post by: 427HISS on April 15, 2018, 08:15:07 PM

Going to try the CVG.

Title: Re: March Performance OR CVF Racing Pulley's ?
Post by: Jb427 on April 15, 2018, 09:37:14 PM

I have used CVF pulley's on 3 cars now 351w 69 stang 429 83 f100 and 2v crank pulley only for added power steer on 66 fairlane only thing i didn't like is when you use a full set they always slipped and howled due to the high polish it dose go away over time but still not a nice sound on start up. Last set i taped up and did a lite sandblast of the v on each pulley worked a treat no unwanted screaming belts on start up and no need to use that spray grip that makes a mess of every thing.

Title: Re: March Performance OR CVF Racing Pulley's ?
Post by: babybolt on April 16, 2018, 06:27:12 AM

The March's I've had have always been hard anodized.