FE Power Forums

FE Power Forums => Non-FE Discussion Forum => Topic started by: Royce on March 13, 2018, 09:09:32 AM

Title: Part I.D.
Post by: Royce on March 13, 2018, 09:09:32 AM

Can anyone tell me what the application would be for this fuel filter?

Title: Re: Part I.D.
Post by: machoneman on March 13, 2018, 09:11:49 AM

The bottom cannister is Ford of course. Maybe a boat or truck application as it looks pretty heavy-duty and maybe remote mounted off the engine.

Title: Re: Part I.D.
Post by: Jim Comet on March 13, 2018, 09:36:45 AM

There is a picture of it in the old ford 60-64 michrofiche (row 17-63). It is listed for 62-64 Fairlane in the illustration. It is hard to tell but it may be a C2AZ-9155-A/FG33. Jim

Title: Re: Part I.D.
Post by: Royce on March 13, 2018, 11:32:40 AM

it is C2AE 9A290A

Title: Re: Part I.D.
Post by: Jim Comet on March 13, 2018, 12:01:32 PM

Thats the engineering number. Ford part numbers on the box and the parts catalogs are never the same as the number on the part. I don't have current access to my old engineering cross reference at this time. Jim

Title: Re: Part I.D.
Post by: thatdarncat on March 13, 2018, 01:27:15 PM

I think Jim has the right answer, also full size Ford, various applications. Pictures from the Ford Parts Book:

(https://s5.postimg.org/ki2lzj7kn/A437288_C-_D6_A2-43_C3-_BD8_B-3122_F9_DA3_CA4.jpg) (https://postimg.org/image/pgq4e2bdf/)

(https://s5.postimg.org/5ammfffsn/BF565851-_CBF0-47_BD-9_B2_F-505_E92084408.jpg) (https://postimg.org/image/48cfwvwz7/)

Title: Re: Part I.D.
Post by: 57 lima bean on March 13, 2018, 01:35:26 PM

Part I.D.
« on: Today at 09:09:32 AM »   Royce was still in his pajamas.

Title: Re: Part I.D.
Post by: babybolt on March 13, 2018, 01:44:12 PM

Used in heavy duty applications like taxi and police car, Fairlane and Galaxie.

Title: Re: Part I.D.
Post by: Royce on March 13, 2018, 02:20:18 PM

Steve...  I am retired..... sometimes I wear PJs all day.. Definitely not silk though

Title: Re: Part I.D.
Post by: Royce on March 13, 2018, 02:23:05 PM

Hmmm  On ebay that just became a Police Interceptor filter

Title: Re: Part I.D.
Post by: Heo on March 13, 2018, 02:49:07 PM

As far as i know thats the "low perf" filter PI had the "Hi Perf" filter
like the 427

Title: Re: Part I.D.
Post by: machoneman on March 13, 2018, 02:54:50 PM

Nope! Definitely a super-rare Cobra Jet 428 part that only factory-backed racers got.

Bet it was on the 1st Tasca 'Stang or maybe Don Nicholson's?

Man, I wish I had the $900 asking price  ;)

Title: Re: Part I.D.
Post by: Heo on March 13, 2018, 03:04:24 PM

I had one of those filters in a Studebaker Snow weasel they had put a
singel barrel carb from a Ford six on

Title: Re: Part I.D.
Post by: 57 lima bean on March 13, 2018, 04:29:29 PM

Quote from: Royce on March 13, 2018, 02:20:18 PM

Steve...  I am retired..... sometimes I wear PJs all day.. Definitely not silk though

 
 
   You could have been the Hugh Hefner of Engine Masters.

Title: Re: Part I.D.
Post by: Heo on March 13, 2018, 05:01:30 PM

Quote from: 57 lima bean on March 13, 2018, 04:29:29 PM

Quote from: Royce on March 13, 2018, 02:20:18 PM

Steve...  I am retired..... sometimes I wear PJs all day.. Definitely not silk though

 
 
   You could have been the Hugh Hefner of Engine Masters.
[/quote
 :o ;D ;D ;D ;D