FE Power Forums

FE Power Forums => Non-FE Discussion Forum => Topic started by: Jb427 on February 09, 2018, 02:47:47 PM

Title: Good Quality Solenoid
Post by: Jb427 on February 09, 2018, 02:47:47 PM

Im sick of buying junk Starter Solenoids any one know a good quality one to get.

Title: Re: Good Quality Solenoid
Post by: cammerfe on February 09, 2018, 03:24:31 PM

Not too long ago I found a NOS Standard in a shop that had been there for a long time. It's at least a possibility.

KS

Title: Re: Good Quality Solenoid
Post by: Jb427 on February 09, 2018, 03:50:05 PM

Yes they sure don't make them like they use to  :(

Title: Re: Good Quality Solenoid
Post by: Nightmist66 on February 09, 2018, 03:53:07 PM

Motorcraft SW-7663. Still readily available. Bought one for mine a couple months ago.....

Title: Re: Good Quality Solenoid
Post by: turbohunter on February 09, 2018, 04:10:59 PM

If you have a parts store that carries the Standard line they have two sub lines. One is cheap, one is good quality.
For solenoids the pn is SS581 for the good line with more windings and a heavier duty unit.
The SS581T is the cheap line. Don't get that.

Title: Re: Good Quality Solenoid
Post by: cattleFEeder on February 09, 2018, 06:16:17 PM

I have had good luck with these, they were US made not sure if they still are.
https://www.summitracing.com/parts/acc-40200