FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: c9zx on July 04, 2012, 09:56:58 AM

Title: Need to find a good machine shop
Post by: c9zx on July 04, 2012, 09:56:58 AM

somewhere reasonably close to Indianapolis IN. A friend needs to have a BT intake milled to fit properly on his zero decked 427. Can anyone recommend a competent shop? Thanks for the help, Chuck

Title: Re: Need to find a good machine shop
Post by: machoneman on July 09, 2012, 07:36:55 PM

Chuck, Indy Cylinder Heads is an very competent NHRA winning shop right in your area.

http://www.indyheads.com/

But I have no idea if they would handle an FE intake due to tooling/fixtures set up as they pretty much only do Dodge/Plymouth  383-426hemi-440 engines. May be worth a call. Barry R in/near Detroit, MI is the next closest. He can be found here:

http://www.survivalmotorsports.com/