FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: TomP on December 14, 2017, 10:30:13 PM

Title: need some SOHC heads?
Post by: TomP on December 14, 2017, 10:30:13 PM

You won't find another pair for this price!  OK maybe several other pairs...



https://www.ebay.com/itm/Dyno-Don-Nicholson-427-SOHC-Aluminum-cylinder-heads-HISTORIC/292360897593?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D49566%26meid%3Dbc1efa313a2242e98d251ea6a27f8edb%26pid%3D100005%26rk%3D4%26rkt%3D6%26sd%3D282764955803&_trksid=p2047675.c100005.m1851 (https://www.ebay.com/itm/Dyno-Don-Nicholson-427-SOHC-Aluminum-cylinder-heads-HISTORIC/292360897593?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D49566%26meid%3Dbc1efa313a2242e98d251ea6a27f8edb%26pid%3D100005%26rk%3D4%26rkt%3D6%26sd%3D282764955803&_trksid=p2047675.c100005.m1851)

Title: Re: need some SOHC heads?
Post by: jayb on December 14, 2017, 10:45:21 PM

Good luck selling those.  Not only have they been welded up after some kind of engine explosion, but they come with those junk RAS rocker arms.  Best bet is to just throw those away...

Title: Re: need some SOHC heads?
Post by: TomP on December 15, 2017, 02:30:51 AM

So you aren't hitting the Buy It Now for 25 grand then?  :P

He also has a pair of iron High Risers for a similarly high price.

Title: Re: need some SOHC heads?
Post by: gt350hr on December 15, 2017, 11:25:12 AM

     These could be from Carl ( or Cal) Nicholson who was in the Ohio/Pa area. Dyno did have a set of aluminum heads long ago that had a blown up chamber. He sold them OVER 25 years ago when he still had the shop in Orange. He said he never fixed it because it was BENT.