FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: My427stang on June 30, 2012, 02:41:28 PM

Title: New Take-off Edelbrock FE valve springs - SOLD delete at will - Thanks Chad!
Post by: My427stang on June 30, 2012, 02:41:28 PM

Never run, if someone needs a set. 

130 lbs @ 1.885  360 lbs per inch.  Summit sells for 89.00.  70 delivered everywhere except AK, HI and other "cannot drive to places" 

Same as these

http://www.summitracing.com/parts/EDL-5792/Application/?prefilter=1

Title: Re: New Take-off Edelbrock FE valve springs
Post by: Chad D on July 01, 2012, 11:40:52 AM

Ross--

I'm interested if they aren't already spoken for...

Chad D

Title: Re: New Take-off Edelbrock FE valve springs
Post by: My427stang on July 01, 2012, 11:53:31 AM

Sounds good Chad, want to meet up somewhere or use mail?

Shoot me an email at My427stang @ cox.net

Talk to you soon

Title: Re: New Take-off Edelbrock FE valve springs
Post by: Chad D on July 01, 2012, 12:02:24 PM

I'll be in West Omaha later today, will you be around?  We can meet somewhere in between there and your place if that's OK.  Otherwise I'm sure I'll be making another trip to the area some time soon.  Phone is 402-440-CHAD

Title: Re: New Take-off Edelbrock FE valve springs
Post by: My427stang on July 01, 2012, 12:08:51 PM

Sure,
Where in West O?

BTW, you know you hit the big time when you have a phone number with your name at the end!

Title: Re: New Take-off Edelbrock FE valve springs
Post by: Chad D on July 01, 2012, 12:14:02 PM

Way west.  Waterloo area... 228th & Dodge or so.  I'll drive in to wherever though.  I asked for that phone number for my amnesiac mother :-)  I tried for 427-CHAD, but the prefix wasn't in use when I moved to the area.

Title: Re: New Take-off Edelbrock FE valve springs
Post by: My427stang on July 01, 2012, 05:21:42 PM

I could get spoiled with having people come pick up the parts!  No chasing around, no boxing anything up, MUCH easier

Thanks Chad!

Title: Re: New Take-off Edelbrock FE valve springs - SOLD delete at will - Thanks Chad!
Post by: Chad D on July 02, 2012, 08:42:13 AM

Easier for those of us with no patience, too!  Thanks Ross!