FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: scott foxwell on September 20, 2017, 02:17:30 PM

Title: Rocker stand bolt spacing
Post by: scott foxwell on September 20, 2017, 02:17:30 PM

Does anyone have the rocker stand bolt spacing dimensions for the FE heads?
TIA

Title: Re: Rocker stand bolt spacing
Post by: bluef100fe on September 21, 2017, 10:49:23 AM

I believe the spacing is 4.625 for the end cylinders, unsure of the spacing between the middle cylinders 2 and 3...

Title: Re: Rocker stand bolt spacing
Post by: comet2 on September 21, 2017, 10:59:32 AM

scott i got 4.640 on ends 4.970 middle with calipers since i was measuring  pulleys

Title: Re: Rocker stand bolt spacing
Post by: scott foxwell on September 21, 2017, 11:26:54 AM

Quote from: comet2 on September 21, 2017, 10:59:32 AM

scott i got 4.640 on ends 4.970 middle with calipers since i was measuring  pulleys

I did some reverse engineering last night and came up with similar numbers. Thanks.

Title: Re: Rocker stand bolt spacing
Post by: jayb on September 21, 2017, 11:41:37 AM

The end ones should be the same as FE bore spacing, 4.630". 

Title: Re: Rocker stand bolt spacing
Post by: scott foxwell on September 21, 2017, 01:21:57 PM

Quote from: jayb on September 21, 2017, 11:41:37 AM

The end ones should be the same as FE bore spacing, 4.630".

Exactly! That little light just came on... ::)