FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Katz427 on May 20, 2017, 07:45:59 PM

Title: Black Eagle motor mounts
Post by: Katz427 on May 20, 2017, 07:45:59 PM

Has anyone used the Black Eagle racing motor mounts for Fe in a fairlane or comet that are on eBay?

Title: Re: Black Eagle motor mounts
Post by: fastback 427 on May 20, 2017, 09:26:19 PM

Yup. Welded up the first set made.

Title: Re: Black Eagle motor mounts
Post by: Katz427 on May 21, 2017, 04:46:06 PM

Jamie, question on height. Are they same as stock mount height?

Title: Re: Black Eagle motor mounts
Post by: fastback 427 on May 21, 2017, 05:46:13 PM

Yes. Motor sits where it should from factory. The guy that sells them is a dink though. Way over priced.
Also on edit they are harsh on the vibration .

Title: Re: Black Eagle motor mounts
Post by: Katz427 on May 21, 2017, 08:42:10 PM

Well that is pretty good then. May be a bit pricey but near everything is. I do not have a shop handy these days so  I do what I can. I would like to install my 427 in the 67 Ranchero. It is a 5.0 right now. As you know room is at a premium under hood. I might do a little work on the shock towers but  those mounts free up a little room around the cross member.

Title: Re: Black Eagle motor mounts
Post by: fastback 427 on May 21, 2017, 08:57:00 PM

If i had more time id send you a set free.99. Still have the program to laser them out.