FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: fekbmax on April 25, 2017, 02:22:59 PM

Title: Fe starter
Post by: fekbmax on April 25, 2017, 02:22:59 PM

Any good single wire high torque starters out there ?

Title: Re: Fe starter
Post by: fekbmax on April 25, 2017, 07:19:05 PM

Thanks. Found what i waz lookin for.

Title: Re: Fe starter
Post by: Fireater1968 on July 13, 2021, 08:53:56 AM

and what was your findings?

Title: Re: Fe starter
Post by: cjshaker on July 13, 2021, 10:41:45 AM

Quote from: Fireater1968 on July 13, 2021, 08:53:56 AM

and what was your findings?

While this isn't a single wire, it doesn't require any changing of the stock wiring, just some simple re-routing of the stock wire, plus adding one wire from the solenoid to the starter. It eliminated hard hot starts on my Mach. I just received a second one that I ordered last week, for a new build.

https://www.robbmcperformance.com/products/fordat_starter.html

If it's a high compression deal, I'd highly recommend the pinion support option. Actually, I'd recommend it regardless of application.

Title: Re: Fe starter
Post by: 427mach1 on July 13, 2021, 02:05:42 PM

Good choice on the RobbMc starter.  They have very nice stuff!

Title: Re: Fe starter
Post by: gregaba on July 13, 2021, 05:41:16 PM

Thanks for the link.
I was just getting ready to order one for my build I hope to get done next year.
Greg