FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: ChiefDanGeorge on March 26, 2017, 06:45:32 PM

Title: Damper Sleeve, is there a particular one to get
Post by: ChiefDanGeorge on March 26, 2017, 06:45:32 PM

I think I need to sleeve my damper spacer, doing some test fitting I noticed a slight groove. Not sure how I managed to miss it.

Title: Re: Damper Sleeve, is there a particular one to get
Post by: rhinosoft on March 26, 2017, 08:32:30 PM

Hi Chief,

Have appended a link, I think to be honest they are all the same but packaged differently. I'd just contact one of the vendors like Brent and grab a steel or alloy replacement and not worry about the sleeve?
 

https://www.summitracing.com/parts/fel-16213/applications/make/ford


Graeme

Title: Re: Damper Sleeve, is there a particular one to get
Post by: ChiefDanGeorge on March 27, 2017, 04:47:27 AM

Probably should just get a new one.

Quote from: rhinosoft on March 26, 2017, 08:32:30 PM

Hi Chief,

Have appended a link, I think to be honest they are all the same but packaged differently. I'd just contact one of the vendors like Brent and grab a steel or alloy replacement and not worry about the sleeve?
 

https://www.summitracing.com/parts/fel-16213/applications/make/ford


Graeme