FE Power Forums
FE Power Forums => Member Projects => Topic started by: Katz427 on March 19, 2017, 01:32:22 PM
-
Thought I would ask the people here how they have handled the suspension on their galaxies. I am interested in what mods you did that improved handling and feel. As I found with my 67 ranchero, todays tires like a different geometry to get the full benefit. Anyone use pieces from Hochkis on their Galaxie? I know back years ago racing these cars we used h/m parts that allowed for more change in the geometry of the suspension. But oval track is a bit different than street. The car will be powered by a 482 tunnel port and a toploader. I thought some other people's experience with these cars would be helpful. Thank you
-
I have AddCo front and rear sway bars on my 66 Galaxie. When I pit them on they were the only game in town for Galaxies. It flatten it out a lot in the corners. I have since added adjustable rear upper/lower control arms and an adjustable track bar from Spohn performance. I did this mainly to center my rear tires in the wheelwells for my slicks and to aid in adjusting the pinion angle. I am running a 521BBF(not FE) and a C6. I have ran consistant 11.70s-80s during Dragweek last year.
-
Thank you Alan that is the kind of feedback I am looking for. To run those times your car must be planting itself fairly well. I never drove one of these cars with a whole lot of power as the one I had a 289. I have been wondering what I should do for this car with a much larger more powerful engine.
-
Check this out ;)
http://www.spohn.net/blog/misc/FSC-Galaxie.pdf
-
^^^ bought all these same parts/pieces for our '65 Galaxie project. I did some hunting around and general consensus landed me with the Spohn stuff. Ours is the same idea, 505 Tunnelport FE. Still about a year or two from completion.