FE Power Forums

FE Power Forums => Member Projects => Topic started by: hyper64 on February 17, 2017, 05:31:52 PM

Title: 1967 Falcon with Jay's Adapter
Post by: hyper64 on February 17, 2017, 05:31:52 PM

Here is my 1967 Falcon with Jay's adapter. The motor is 416 inches with a set of Edelbrock 1404 500cfm carbs. I have a toploader and a 9 inch in it. A friend of mine that is a retired machinist from Scott Paper did the linkage fabrication and some other stuff on it. So far I've taken it up to Lake George and some local events. There is plenty to do but it goes good and straight and is fairly quick.  Jay's adapter takes the project to the next level. Thanks Jay.
Jim Macione
(http://i216.photobucket.com/albums/cc49/hyper64/2336_zpsmfvmphck.jpg)
(http://i216.photobucket.com/albums/cc49/hyper64/2311_zpsxdt788lv.jpg)
(http://i216.photobucket.com/albums/cc49/hyper64/2305_zpsw9inndfy.jpg)
(http://i216.photobucket.com/albums/cc49/hyper64/2324_zpsb2quhazm.jpg)

Title: Re: 1967 Falcon with Jay's Adapter
Post by: jayb on February 18, 2017, 10:26:13 AM

That engine looks REALLY good with those Mercury pentroofs...

Title: Re: 1967 Falcon with Jay's Adapter
Post by: turbohunter on February 21, 2017, 02:03:03 PM

Yes it does, I'm a fan.