FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: stroked67 on February 02, 2017, 06:54:24 PM

Title: 463 in machine shop!
Post by: stroked67 on February 02, 2017, 06:54:24 PM

Took my 463 to machine shop this weekend.  Getting new bearings all the way around, new oil pump, new timing set, new cam, new lifters going with the crower severe duty.  As some of you remember I'm the guy who had a lifter come apart and MUNCH the cam.  Thank god the crank was saved

Title: Re: 463 in machine shop!
Post by: TorinoBP88 on February 03, 2017, 02:54:13 PM

R U going roller cam?  If so which brand and what are approx specs?

Title: Re: 463 in machine shop!
Post by: stroked67 on February 18, 2017, 06:05:05 PM

Oh yeah! Full roller solid lifters, going with the crower hipo severe duty lifters, brand of cam is special grind from the denver area ford fe magician. I havnt recieved a call back on the numbers yet but itll be around 635 int 645 exh with 248 duration.

Title: Re: 463 in machine shop!
Post by: stroked67 on February 19, 2017, 09:46:37 AM

Cam research Corp. In Denver Colorado is grinding the cam.