FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: whiskeyrunner on December 12, 2016, 11:25:29 PM

Title: Fresh 390 crossbolt block, Mahle stroker 390/431 pistons, Diamond 428 pistons
Post by: whiskeyrunner on December 12, 2016, 11:25:29 PM

Block is fresh bored and honed to 4.080 with torque plates, square decked, ARP main studs at all 5 main caps, mains align honed, oil modifications done, cam bearings and freeze plugs installed....$1200 OBO

--New set of Mahle 390/431 stroker flat-top forged pistons, rings, pins and locks...they fit a 4.125 stroke crankshaft, 6.7 rod, 4.080 bore.....they would work great in the block listed above....7 identical used pistons are included....$540 OBO

--New set of Diamond 14cc dish 428 forged pistons, rings, pins, locks....they are .045 over (4.175) and fit stock length rods and 3.98 crankshaft....$525 OBO

For more information call Billy at four78, six97, 7one66 or email billywade7166@gmail.com

Title: Re: Fresh 390 crossbolt block, Mahle stroker 390/431 pistons, Diamond 428 pistons
Post by: edgarval on December 17, 2016, 11:47:06 AM

Is there all 8 pistons for the 4.125 stroke ?

Title: Re: Fresh 390 crossbolt block, Mahle stroker 390/431 pistons, Diamond 428 pistons
Post by: whiskeyrunner on December 27, 2016, 11:23:43 PM

8 Brand new in the box Mahle 4.125 stroker pistons, rings, pins and locks and also 7 used pistons that are identical to the new ones. (15 pistons total for $500 ) ...I'm sorry I wasn't clear on that.

Call or text Billy at 478-697-7166 or email  billywade7166@gmail.com

Located in middle Georgia.

Thanks and have a blessed day.

Title: Re: Fresh 390 crossbolt block, Mahle stroker 390/431 pistons, Diamond 428 pistons
Post by: whiskeyrunner on December 27, 2016, 11:26:22 PM

Block has been sold but both piston kits are still available for $500 each set.