FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Qikbbstang on September 14, 2016, 04:26:30 PM

Title: Harland Sharp R-Rockers question on recalled adjusters
Post by: Qikbbstang on September 14, 2016, 04:26:30 PM

I understand there were Harland sharp FE rocker "recalls" back some years ago that involved the adjusters.  I've got two sets of the common copper colored w/bronze bushings and steel-roller follower Harland Sharp's, both sets I've had stashed away for a long time.
   Can anyone provide a picture of the questionable adjusters vs the good adjusters ASAP?

Title: Re: Harland Sharp R-Rockers question on recalled adjusters
Post by: Yellow Truck on September 16, 2016, 09:38:45 AM

Curious if you tried them - http://www.harlandsharp.com/ (http://www.harlandsharp.com/) - and if so what their response was.

Title: Re: Harland Sharp R-Rockers question on recalled adjusters
Post by: Qikbbstang on September 18, 2016, 06:27:56 PM

D'oh! thank you will be on my call list this week

Title: Re: Harland Sharp R-Rockers question on recalled adjusters
Post by: Qikbbstang on September 19, 2016, 05:35:33 PM

WOWZER WOWZER
   Harland Sharp ROCKS!

    How many point nuts are on the adjusters 6 or 8?_______
------------------6------------------
  --- send them back and we'll replace them

   

Title: Re: Harland Sharp R-Rockers question on recalled adjusters
Post by: 57 lima bean on September 27, 2016, 01:01:01 PM

I've had to replace a few over the years.It was mandatory back then to use a Harland Sharp box to get new ones.