FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: fryedaddy on May 16, 2016, 02:48:01 PM

Title: re-torque heads
Post by: fryedaddy on May 16, 2016, 02:48:01 PM

i have my rockers and pushrods out right now and i have a few hundred miles and a dozen street passes on my new 428.should i re-torque the heads while i have the rockers off or is re-torquing not required?its just a 11 to 1, 500-550 hp engine.

Title: Re: re-torque heads
Post by: cjshaker on May 16, 2016, 06:39:13 PM

It certainly wouldn't hurt anything. If I had the complete valvetrain off,  I'd probably double check it just because I could. It'll only take about 5 minutes.

Title: Re: re-torque heads
Post by: fryedaddy on May 16, 2016, 07:11:06 PM

i believe i will, Doug,thanks man