FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: My427stang on April 20, 2016, 08:05:03 AM

Title: WANTED: New mild hydraulic cam, anywhere from 268 adv to 274 adv
Post by: My427stang on April 20, 2016, 08:05:03 AM

Anyone have something new on the shelf they want to dump?  Looking for something with a 268 to 274 adv intake lobe or anything in between.  This is for a budget short block with no home as of yet.  Wide range of "good enough"   

Not really concerned with LSA, ICL, .050, just looking for new and cheap :)

Title: Re: WANTED: New mild hydraulic cam, anywhere from 268 adv to 274 adv
Post by: GJCAT427 on April 20, 2016, 11:22:15 AM

Let me check one I have . It is slightly used. I will get back to you tonight.

Title: Re: WANTED: New mild hydraulic cam, anywhere from 268 adv to 274 adv
Post by: GJCAT427 on April 20, 2016, 05:40:06 PM

Ross, I have a Crower 280HP grind that has the following Adv intake 280* duration, .537lift. exhaust 286* duration,.551 lift. 112* lobe separation.  If you go to the Crower cam specs its part # 16241 it shows the full cam card. Garry

Title: Re: WANTED: New mild hydraulic cam, anywhere from 268 adv to 274 adv
Post by: My427stang on April 21, 2016, 06:32:59 AM

Garry, thanks a bunch but I think that's just a little too much duration and late ICL for what I am trying to do.  I do appreciate you chasing it down though.

Title: Re: WANTED: New mild hydraulic cam, anywhere from 268 adv to 274 adv
Post by: Tony Fritz on April 21, 2016, 11:15:47 AM

Ross,

I have a new Crane Hydraulic Roller Cam pn 349521 HR-222/332-2S-10. Specs are:

Adv Dur - 284 - I , 290 - E
Dur @.050 - 222 - I , 226 - E
Lift - 584 - I , 607 - E
110 CL
2500-6000 RPM range.

New in the box. Make me a reasonable offer. I am going to the FE Race & Reunion and can bring it to Beaver Springs.

Thanks, Tony

Title: Re: WANTED: New mild hydraulic cam, anywhere from 268 adv to 274 adv
Post by: chris_r on April 22, 2016, 09:49:49 PM

i have a new comp cam that is 281 on the intake if that will work?

Title: Re: WANTED: New mild hydraulic cam, anywhere from 268 adv to 274 adv
Post by: My427stang on April 23, 2016, 03:16:27 AM

Thanks guys, I ended up finding one, went with a single pattern 276 adv, 219 @ .050, 110 on 106, .530 lift.  Should be a nice little cam for this 390

I appreciate everyone responding to help