FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: FordEver on April 05, 2016, 02:04:44 PM

Title: SFI C-6 flexplate
Post by: FordEver on April 05, 2016, 02:04:44 PM

My new P.A. 36400 not as good as the one i bought seven years ago. Different supplier/design/whatever ?  Quality went to hell. What are you guys using ? I,m leaning towards the ATI 915722. 

Title: Re: SFI C-6 flexplate
Post by: fekbmax on April 05, 2016, 02:14:21 PM

When I was running the C 6 I always used ATI . pricey but good stuff. TCI use to make a good flex plate to back in the 80's . not sure if they still do.

Title: Re: SFI C-6 flexplate
Post by: fairlanegt427 on April 06, 2016, 12:00:06 AM

i have an ati.  it bolted right up and i had no problems whatsoever.  i put it on about 2 years ago.

Title: Re: SFI C-6 flexplate
Post by: FordEver on April 06, 2016, 07:13:07 PM

Thanks for the replys/info. Looks like i,ll get that ATI

Title: Re: SFI C-6 flexplate
Post by: fairlanegt427 on April 07, 2016, 09:15:42 AM

its kinda funny too,  all these sanctioning bodies want you to have this "SFI" stuff but they never ever see if its on or installed.  and then what really gets me is that they make you sign  a waiver before you even pull in.   to me its just a catch 22 imho.