FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Heo on February 22, 2016, 12:58:45 AM

Title: max bore 352
Post by: Heo on February 22, 2016, 12:58:45 AM

Is a 352 block Different than a 390?
you cant in most cases bore a 352 4.090??

Title: Re: max bore 352
Post by: fastback 427 on February 22, 2016, 01:47:50 AM

Standard bore on a 352 is 4.00. Standard on a 360/390 is 4.05. You would have to get a sonic check but I don't think you'll find many that will go more than 4.05. We just took apart a supposed ".30 over 390". Sonic check turned up a .60 wall thickness.

Title: Re: max bore 352
Post by: Heo on February 22, 2016, 06:25:07 AM

As i suspected then