FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: FE Jonny on February 09, 2016, 09:52:19 PM

Title: Cool fabricated valve covers
Post by: FE Jonny on February 09, 2016, 09:52:19 PM

I found these guys over at the Bronco Forum.
http://left-eye-blind-racing-and-fabrication.myshopify.com/products/ford-valve-covers-289-302-351w-351c-351m-400-fe-429-460?variant=1007129441
Reasonable prices for American made stuff

Title: Re: Cool fabricated valve covers
Post by: Drew Pojedinec on February 09, 2016, 10:46:14 PM

I'll be at Kris's shop to borrow a truck this weekend, then driving up to Paul's shop in Maryland to pick up a bronco and taking it back to S carolina.....  (whirlwind, 24 hour tour)

good folks the both of em, can't go wrong sending them business.

Title: Re: Cool fabricated valve covers
Post by: ChiefDanGeorge on February 10, 2016, 05:38:25 AM

Drew, do you live in SC? I live in Columbia.

Title: Re: Cool fabricated valve covers
Post by: Drew Pojedinec on February 10, 2016, 07:56:11 AM

I know you do, we had this discussion a lil while back :-)  I'm on the Ga/Florida line.

Title: Re: Cool fabricated valve covers
Post by: ChiefDanGeorge on February 10, 2016, 11:23:00 AM

That's right we did.
I most likely will not remember this talk either.

Quote from: Drew Pojedinec on February 10, 2016, 07:56:11 AM

I know you do, we had this discussion a lil while back :-)  I'm on the Ga/Florida line.

Title: Re: Cool fabricated valve covers
Post by: bn69stang on February 11, 2016, 09:02:40 PM

Have a safe trip Drew  , happy towing .. Bud

Title: Re: Cool fabricated valve covers
Post by: Drew Pojedinec on February 11, 2016, 09:24:52 PM

Got put off, towing vehicle got in an accident :-(

Title: Re: Cool fabricated valve covers
Post by: bn69stang on February 11, 2016, 09:43:10 PM

You can borrow my truck Drew .. Bud

Title: Re: Cool fabricated valve covers
Post by: FE Jonny on February 11, 2016, 10:00:38 PM

I am in IL. Otherwise I could do it, fuel might be a little much LOL.

Title: Re: Cool fabricated valve covers
Post by: Drew Pojedinec on February 11, 2016, 10:09:04 PM

Nah, quite fine as is.... this local kid is having his bronco redone by the Left Eye Blind crew.  He wanted me to ride with him (I'm handy on a road trip).
I figured if the kid was desperate enough to ask me to go with him, he musta really needed it, so I agreed.

It's ok, truck will get fixed and we'll go later (when hopefully it isn't so dang cold).

Title: Re: Cool fabricated valve covers
Post by: FE Jonny on February 11, 2016, 10:20:51 PM

Cool , I would like to see some pics. Tell him to post some up over at FSB Forums. I like the LEB stuff and plan on using their Dana 60/80 brake kit and some other stuff for my build along with their FE valve covers. I am hoping to go to the bone yard and score a D80 hybrid with ABS from a Dodge 2500 this week for the rear of mine. Ended up scrapping my 9" 3:70 rear idea in lieu of a strait axle D60 swap in front with 4:10s. You guys talked me into it LOL.

Title: Re: Cool fabricated valve covers
Post by: Drew Pojedinec on February 11, 2016, 11:17:56 PM

Yeah, he's got a 79 Bronco, neat truck really.

Most of his build stuff is on the LEB facebook page:
https://www.facebook.com/media/set/?set=a.379802568868889.1073741868.170666619782486&type=3

Can't say I do much business with them myself, I prefer to just build my own stuff badly :P