FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: 2ndgear on February 02, 2016, 04:36:57 PM

Title: snap in mounting single contact bulb
Post by: 2ndgear on February 02, 2016, 04:36:57 PM

I know this is a bit off of the subject FE but it is for a car with a FE engine in it. What I am looking to where would a guy get a snap in mounting plastic single contact light bulb socket. Like for the # 53 or # 57 bulb. I believed the older car had them for the dash lights. I think they were black plastic push snap in 2 wire. One wire is for power and the other one is ground. The socket needs to be plastic with its own ground wire because a metal socket would ground out and not turn off the oil pressure switch. Any help would be great. Thanks in advance

Title: Re: snap in mounting single contact bulb
Post by: rcodecj on February 02, 2016, 06:31:27 PM

Summit Racing has them.
Here's one but if you search there's more:
http://www.summitracing.com/parts/rfw-pl01/overview/

Title: Re: snap in mounting single contact bulb
Post by: 2ndgear on February 02, 2016, 08:32:22 PM

Thanks rcodecj that is exactly what I was looking for.