FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: fekbmax on December 09, 2015, 10:06:15 AM

Title: Valve cover spacer's
Post by: fekbmax on December 09, 2015, 10:06:15 AM

Not for me, trying to help someone out,  Does blue thunder or anyone still make these and are they actually able to be gotten or anyone have a lesson a good used set or should I just get busy and make a set up ?

Title: Re: Valve cover spacer's
Post by: FE Jonny on December 09, 2015, 10:40:18 AM

Barry at Survival had them about a year ago. Really though it is cheaper to buy covers than the spacers.

Title: Re: Valve cover spacer's
Post by: 19cougar68 on December 09, 2015, 12:39:07 PM

While at the FE Race & Reunion I picked up a card from Medice Manufacturing where they were displaying their valve cover spacers.  Their website is medicemfg.com  They seemed reasonable to me.

Title: Re: Valve cover spacer's
Post by: Barry_R on December 09, 2015, 01:30:07 PM

Just sold my last set.
Took about 2 years to "move them"
Not an inventory item for sure...

Title: Re: Valve cover spacer's
Post by: jholmes217 on December 09, 2015, 02:13:08 PM

Dennis at DSC Motorsports has them.  http://www.dscmotorsport.com/Cylinder/index.htm

I bought a set a couple months ago.  They look great, but I haven't had a chance to put them on yet.  Dennis recommends cork gaskets instead of rubber if you use them.

Title: Re: Valve cover spacer's
Post by: fekbmax on December 09, 2015, 02:47:24 PM

Thanks, you guys are awesome as always.

Title: Re: Valve cover spacer's
Post by: babybolt on December 09, 2015, 10:06:12 PM

I bought a set from Dan Medice.  Good stuff and he makes them himself.  He's a Ford guy too.

Title: Re: Valve cover spacer's
Post by: e philpott on December 09, 2015, 10:17:42 PM

Quote from: babybolt on December 09, 2015, 10:06:12 PM

I bought a set from Dan Medice.  Good stuff and he makes them himself.  He's a Ford guy too.

X3 , I got mine a few years ago at Columbus