FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Stangman on November 14, 2015, 10:22:40 PM

Title: First oil change
Post by: Stangman on November 14, 2015, 10:22:40 PM

So motor was broke in open filter and was clean, install new filter make some adjustments and drove for about 10 miles. Want to do first oil change what oil is everyone running ( solid cam)
WHICH OIL
WEIGHT

Title: Re: First oil change
Post by: Nightmist66 on November 14, 2015, 10:27:36 PM

Roller or flat-tappet? If a flat tappet, we use Brad Penn. 10W30 in my 390 and in our 406.

Title: Re: First oil change
Post by: Stangman on November 14, 2015, 10:38:23 PM

That's what I used to break it in so use their regular 10-30 oil flat tappet bye the way

Title: Re: First oil change
Post by: cammerfe on November 15, 2015, 12:08:52 AM

After the first couple (short interval) changes, I go to Mobil 1.

KS

Title: Re: First oil change
Post by: Stangman on November 15, 2015, 07:54:14 AM

Thanks guys this is new to me I have been using castrol 20-50 since I am a kid never had any problems I guess times are changing or I am reading too much