FE Power Forums
FE Power Forums => FE Technical Forum => Topic started by: Qikbbstang on November 05, 2015, 11:43:51 PM
-
For decades I've drooled over the titanium rods pictured in the back room at Tasca Ford. Ti-rods were standard in the 1999-2000 Honda NSX and were said to offer an additional 500 rpm. I had a friend that was maintenance planning mgr in a large chemical plant and he told me how much of a bitch it is to machine titanium. I can only presume these rods had to come out of FoMoCo's deepest skunk-works.
The bottom right corner picture Tasca's back room copy states essentially matched set of titanium LeMans rods and Ed Pink pistons w/Teflon buttons.
<img src="http://i807.photobucket.com/albums/yy359/qikbbstang/SAMCJ2.jpg" alt="[linked image]">