FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: fekbmax on July 25, 2015, 10:45:50 AM

Title: cross bolt main cap
Post by: fekbmax on July 25, 2015, 10:45:50 AM

Need one cross bolt main cap #2 or #4.

Title: Re: cross bolt main cap
Post by: Barry_R on July 25, 2015, 12:44:17 PM

Original or aftermarket block?

Title: Re: cross bolt main cap
Post by: fekbmax on July 25, 2015, 03:11:19 PM

original ford block.
id take a stock iron cap or swap the two i have and possibly some $ for a set of good used pro-gram or other billet caps. i can make either work but was hoping to find 1 standard factory cap to go with the two i have.




(http://i1083.photobucket.com/albums/j387/fekbmax/Mobile%20Uploads/20150307_071545_zpszsytqrsg.jpg) (http://s1083.photobucket.com/user/fekbmax/media/Mobile%20Uploads/20150307_071545_zpszsytqrsg.jpg.html)

Title: Re: cross bolt main cap
Post by: GJCAT427 on July 26, 2015, 03:35:52 PM

I looked in my stash and I do have a *2 main cap. I thought I had 2 of em but found just 1.  What ya got for trades?

Title: Re: cross bolt main cap
Post by: fekbmax on July 26, 2015, 04:14:19 PM

i don't have much, most of my stuff is race type stuff.
i have 15 of these laying around, 1 short of a set,
(http://i1083.photobucket.com/albums/j387/fekbmax/Mobile%20Uploads/20150726_170613_zpspz26cydk.jpg) (http://s1083.photobucket.com/user/fekbmax/media/Mobile%20Uploads/20150726_170613_zpspz26cydk.jpg.html)
have a couple of center hung Holley float bowls,
have some $$$,
what are you looking for ? i got some old stock type 390 stuff laying around.

Title: Re: cross bolt main cap
Post by: GJCAT427 on July 26, 2015, 06:14:27 PM

What do you figure the rockers are worth? I`m not sure what the cap is worth?

Title: Re: cross bolt main cap
Post by: fekbmax on July 26, 2015, 07:07:46 PM

Idk. Ill clean them up and I fig $3 each. I know there all in descent shape. There old TRW stock. That's like $45. For all 15..  I'll toss in the two center hung float bowls to if your intrested..
if not I could do the cash instead if you have a # in your head.
Thanks for thinking about it anyway..
I found the two, he thought he had all 3 but searched all over and couldn't find it. Id even take a #3 if need be cause I'm going to align bore the old block anyway.