FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: aarons428 on January 29, 2012, 08:37:06 AM

Title: FE builder
Post by: aarons428 on January 29, 2012, 08:37:06 AM

Does anybody know if there is is a machine shop in the Nebraska area that knows how to machine and build FE motors? will need to find a good shop within the next year.

Title: Re: FE builder
Post by: mmason on January 29, 2012, 09:32:14 AM

Here is one.
http://www.gessford.com/

Title: Re: FE builder
Post by: DEANs427 on January 29, 2012, 11:29:45 AM

Talk to George at Gessford Machine, Hastings Nebraska. A wealth of FE knowledge, He has done much work for me..

Title: Re: FE builder
Post by: aarons428 on January 29, 2012, 02:25:33 PM

THANK you guys by the look of his website i will more than likely have them do my work!!!!!!!

Title: Re: FE builder
Post by: My427stang on January 30, 2012, 09:20:09 PM

Gessford is pretty good, there is a guy off L in Omaha, I forget his name, nice guy, nearly blind.  I bet he was great at one time, can't really read a mic anymore.

If you are closer to Plattsmouth, I know a couple guys down there that do good work in the machine shop, but maybe not the best at picking parts with today's stuff, but I am pretty comfortable with them hitting the mark I want

Where are you from?

Title: Re: FE builder
Post by: aarons428 on January 30, 2012, 09:45:27 PM

Im in Norfolk

Title: Re: FE builder
Post by: Chad D on May 24, 2012, 11:24:51 PM

Necro post but my two cents:  Gessford did my 406 heads... not cheap but first rate work.  George (Anderson) is a pretty cool fella, if you ask, he'll give you a nice tour of the shop.  Ken Schneider of Engine Dynamics in Davey also builds a spiffy FE, but it's a one man shop and he is VERY busy.

Title: Re: FE builder
Post by: machoneman on May 24, 2012, 11:42:28 PM

Gessford is your shop. #1 machine work and attention to FE details. Senior G has shipped FE stuff around the globe. Not cheap but heck, when did good, no great,  work ever go for cheap?