FE Power Forums
FE Power Forums => Non-FE Discussion Forum => Topic started by: chris401 on June 29, 2015, 09:49:38 PM
-
Not interested in buying a pulley. Judging by the design the bearing should have 2 or more clutch lives in it. I found just the clutch (MOPAR 5140427AA) for my 07 300. I cant find any pictures of it, I am assuming it is just the disk. If so what adhesive would you recomend bonding between fiber and metal?
Chris
Edit: 8/6/15 Looks like I stumped the group. The way is designed did not effect efficiency or slip on engagement. Set the gap at .021. 2100 miles in Texas / New Mexico heat still going.