FE Power Forums
FE Power Forums => Non-FE Discussion Forum => Topic started by: My427stang on June 27, 2015, 09:46:22 PM
-
I have a couple of extra Snap-on bottom roll cabinets. KRA-2008. Like the picture below, but not new (matter of fact they are from the late 80s from our shop and I don't really use them as tool boxes anymore)
The idea is to put them both with about 3 feet between them and a common work bench connecting them, a WAG would be a 36x72 or so bench top
(http://public.snapon.com/R_RRD/Objects_lg/images/KRA2007.jpg)
I was thinking of gluing a bunch of 2x4s together and then sanding and oiling them, but I think pine won't be durable. Oak would be pretty expensive.
I also considered counter top from Lowes/Home Depot, etc, the backsplash that is built in would be nice, but I would imagine that they are not very chemical or heat resistant, plus it seems bolting a vise to it could cause a counter top to fail.
Anyone have any other ideas? My goal is to make it look like it could be bought from Snap on and be very usable without fear of breaking the bank.
-
My shop tables are based on what was cheap (free). In my case, we've got a silo full of marine grade 3/4inch plywood :P
So I doubled them up, staggering the joints and screwing it all together with a lil liquid nails. So 1.5inch plywood. I ripped it all down once screwed together, putty'd it with sheetrock mud, sanded it all down and painted it. Looks pretty nice and is strong enough I can build an engine or transmission on the table with no issues whatsoever.
Obviously in your scenario you'll need to support that 72 inch in the center.
-
Maybe try the Pine boards or 1 1/4 sturdi-floor, then some thin gauge steel or stainless steel bent to fit. My buddy did it on his counter tops in his shop, looks great. He glued the stainless down with liquid nails and it seems very durable.
-
Check locally for used bowling lane wood or gym floor wood. Search for things like Re-purposed or Reused wood. It can be fairly expensive, but you might get lucky.
-
The cabinets were part of a demo from a office building 15 years ago. I used 2 layers of 3/4" MDF then trimmed the outer edge with walnut strips from another demo. Covered the top with Laminate, then routered the edge to a 45* angle. It been very durable over the last 10 years. I do have a bench vise bolted to the other end.
(http://i1318.photobucket.com/albums/t655/JPDixon5/Forums/5C45A16C-3FE6-4C2F-B77D-1BC5D3081F4C_zpszotdrcxp.jpg) (http://s1318.photobucket.com/user/JPDixon5/media/Forums/5C45A16C-3FE6-4C2F-B77D-1BC5D3081F4C_zpszotdrcxp.jpg.html)
-
Ikea has butcherblock tops in various sizes. IIRC, they also have butcherblock countertop which you can order in any size you require.
Lou
-
The Home Depot/Lowes countertop material is much more durable than you might suspect.
-
The Home Depot/Lowes countertop material is much more durable than you might suspect.
Agreed. My wife's side of the shop is where she runs her soap company. The lowes counter tops have been in there for 6 years and with her spilling Lye, essential oils, etc on them, they have shown little wear.
-
The problem with making a new bench
is it's just another place for junk to pile up. ;)
-
The problem with making a new bench
is it's just another place for junk to pile up. ;)
Truer words have never been spoken LOL !!!
Thanks for the great ideas. I'll check them all out. I originally liked the idea of a wood top, but the steel cover seems like it would be nice and of course the countertop would be SO much easier. It's not like I am a production shop either, so good to know the Lowes stuff can handle a little abuse to protect me from myself LOL
-
diamond plate alum. just to give it that manly, industrial look. No sense in making it nicer than the old ladies kitchen, or you'll end up putting granite in the house.
-
i like to cover my hard benches that i use for fabricating and rough work with sheet metal. when it gets really dirty i take a 3" 3m course pad and clean it up. looks really good when clean with a nice swirl pattern as well and last a really ling time. my finish work or Assembly benches are all laminate counter top covering. i use the 4'X8' sheets and cut them to size for the differant bench tops.
-
I used an oak kitchen countertop from a building suply company
that was cheap beacuse it got some minor scratches from shipping.
Works fine bolting a wise to it and bolting it to the steel cabinets
with carriage bolts.
You can use a thin nitrilerubber mat on top of that if you want it moore
chemical resistant when the mat get to oily and greasy i just spray
it with brake cleaner and whipe it clean.
Or cover it with sheetmetal but better cusion with the rubber if you drop
something thats fragile
-
diamond plate alum. just to give it that manly, industrial look. No sense in making it nicer than the old ladies kitchen, or you'll end up putting granite in the house.
Ain't that the truth!
-
I built my work bench top out of a heavy solid core door. Lots of stuff on it ( always ) and the bench vise is as secure as the day I bolted it on.
-
As for new lumber try your local yard. Trim and finish are typicaly 1/3 and rough about 1/2 the cost of the big box stores. Home made laminated beams are strong, a couple or three 2x4 laminated beams will make a stiff less bouncy table.
-
I built my work bench top out of a heavy solid core door. Lots of stuff on it ( always ) and the bench vise is as secure as the day I bolted it on.
He is right. My employer did that years ago. Cheap and built for a 5'4" man but they have held up. Personly I would have spent a little more time and expense for aircraft engine parts.
-
I'll 2nd the sheet metal top.
I have 2 benches, one that's 3'x6' and came from the chemistry lab from where I work. The top is TOTALLY impervious to all liquids, about 4" thick and weighs as much as marble (feels like it too). It took a front-end loader to load it into my truck (JUST the top!), and EIGHT guys to help me unload it when I got home!! That son-of-a-gun is massively heavy! I can't bang or weld on it, but it's great for carb work or just about anything that doesn't involve a sledge :)
My 2nd bench is just a 2"x4" base (also 3'x6') with built in cabinets, but has a 3/4" plywood top covered with a sheet metal top. I can bang the crap out of anything on it, weld on it, sit an engine block on it, basically about anything I want to. It also can be used to ground to when I need to weld something that is impossible to clamp a ground on. I just clamp a ground to the top and the piece is grounded through its touching. Handiest bench I've ever had. Cleans up with a dirty rag, which keeps it from rusting. That's the only drawback to a sheet metal top, it needs to be used somewhat frequently or it will start to surface rust. Using a dirty rag to clean it, it also is good at collecting dust ;D
-
I typically use galvanized sheet metal just because being in the heating and air trade its readily available to me so not alot of rust issues. . Very durable though just as cjshaker said..