FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: preaction on June 07, 2015, 11:53:43 AM

Title: Plastic pucks
Post by: preaction on June 07, 2015, 11:53:43 AM

There is three plastic pucks that go between the  breaker plate and the fixed plate in my 390 distributor they are a little under 1/4" in diameter and I found one broken off leaving  the upper plate on an angle, is there somewhere to get replacements for these ? thanks

Title: Re: Plastic pucks
Post by: RJP on June 07, 2015, 12:35:25 PM

Best bet and easiest source is from a used/junk distributor. I doubt they can be bought new but ya never can tell.

Title: Re: Plastic pucks
Post by: preaction on June 07, 2015, 01:32:03 PM

Thanks Royce

Title: Re: Plastic pucks
Post by: RJP on June 07, 2015, 04:51:26 PM

Quote from: preaction on June 07, 2015, 01:32:03 PM

Thanks Royce

uhhh...ok...but who's Royce? ???

Title: Re: Plastic pucks
Post by: preaction on June 07, 2015, 05:28:40 PM

Sorry for some reason I thought you were W code cougar,  Royce from Texas. Thanks for the help though, Paul.

Title: Re: Plastic pucks
Post by: NIsaacs on June 07, 2015, 05:43:51 PM

I doubt if the plastic deals are available but you can still buy the breaker plate $15-$20.

Nick

Title: Re: Plastic pucks
Post by: preaction on June 07, 2015, 09:23:47 PM

Where do you get the breaker plate ?

Title: Re: Plastic pucks
Post by: Nightmist66 on June 07, 2015, 09:35:11 PM

Rockauto.com shows some, but they are not genuine Ford parts. Just an option.

Title: Re: Plastic pucks
Post by: NIsaacs on June 08, 2015, 05:32:39 AM

Any local auto parts store can get you one, usually overnight, Napa, O'Reilly's, AutoZone, CARQUEST....

Nick