FE Power Forums
FE Power Forums => Member Projects => Topic started by: country63sedan on January 07, 2012, 09:30:22 PM
-
I asked a hypothetical quite awhile ago about this, and decided to move forward. I made several trips to u pull it to get tbi's off of 3.1L V6's. I ordered 3 pieces of 6x61/2x11/2 phenolic, and they got here just after Christmas. I spent most of New Year's weekend in the shop and came out with what you see in the pics. I apologize for the bad photos, a new camera is on the list. Up next I'll tap and plug a bunch of vacuum ports, then work on the fuel plumbing and throttle linkage. I also need to fab up an air cleaner base to use the factory lid. Later, Travis.
(http://i1217.photobucket.com/albums/dd399/country63sedan/miscpics166.jpg)
(http://i1217.photobucket.com/albums/dd399/country63sedan/miscpics190.jpg)
(http://i1217.photobucket.com/albums/dd399/country63sedan/miscpics189.jpg)
(http://i1217.photobucket.com/albums/dd399/country63sedan/miscpics192.jpg)
Edit- I cleaned the camera lens and took new photos. ::)
-
Pretty cool, Travis! It will be really interesting to see how this works out. Keep us up to date...
-
Cool!! That will probably work better than you hope. What are you using to control them?
-
Unless things change, I will be using a megasquirt for the controller. I haven't bought it yet, but plan to asap. The idea of building an ecm from pieces is interesting to me. I have this "thing" about building my own stuff. I'm not scared of the building/wiring/construction of things, but the programming will be a learning experience. Life just put up a couple months worth of road blocks, so progress will be slow. Later, Travis