FE Power Forums
FE Power Forums => FE Technical Forum => Topic started by: TimeWarpF100 on April 09, 2015, 12:32:31 AM
-
I know I seen it somewhere but what plugs are you running with BBM heads?
Is the 3924 a proper plug?
9.8 comp basic 418 build
-
AR3924....
-
AR3924....
Thanks Brent!
Hoping to have the 418 done soon . .
-
I use the NGK, BKR6E in the BBM for pump gas street use. Seems to do better for me than the Autolite on pump gas.
-
Thanks!
Doug @ BBM sent me an email saying the same thing.
He also said for race & good fuel for one to try the NGK R5671A-9 In case anyone else needs that info.
Not having any luck with the NGK plug BKR6E local but will keep looking.
-
Thanks!
Doug @ BBM sent me an email saying the same thing.
He also said for race & good fuel for one to try the NGK R5671A-9 In case anyone else needs that info.
Not having any luck with the NGK plug BKR6E local but will keep looking.
Use part#6962, most parts stores will have it, it crosses over to BKR6E. Edelbrock recommended the BKR5E or #7938, local part number. I only have 2 pulls on them so far but seem fine. I do have a new set of AR3924's just in case, Lol.
The R5671A-9 or #5238 might be too cold for a daily driver or drag racing.
Nick
-
Been following this and did a search,
Amazon.com has them in stock and Amazon.ca has them in stock.
USA price $2.19
Canada price $5.19
hmmm
http://www.amazon.com/NGK-BKR6E-Standard-Spark-Plug/dp/B000A8JLO8/ref=sr_1_1?ie=UTF8&qid=1428665807&sr=8-1&keywords=BKR6E
-
I did find a set last night for 2.39 each less than a mile from my house . .
I had also ordered a set of AR3924's Looks like I will have 2 sets of plugs .. .