FE Power Forums

FE Power Forums => Non-FE Discussion Forum => Topic started by: machoneman on April 06, 2015, 10:27:44 PM

Title: Jay's next challenge: a V-12 Cammer! See a real V-12 Cleveland run on the dyno
Post by: machoneman on April 06, 2015, 10:27:44 PM

http://bangshift.com/bangshiftapex/watch-this-homebuilt-ford-cleveland-v12-552ci-made-from-two-302-blocks-and-three-cleveland-heads-make-dyno-pulls/

Title: Re: Jay's next challenge: a V-12 Cammer!
Post by: cjshaker on April 07, 2015, 08:27:41 PM

That's pretty darn cool! Nearly 700hp and it didn't sound like it idled bad. According to that dyno screenshot, they spun it to 7400 rpms also. Pretty impressive. That shot of the block looked like it was one cast piece. Some nice work there. Funny how it immediately takes on a Ferrari type sound though. Gotta love it.

Title: Re: Jay's next challenge: a V-12 Cammer! See a real V-12 Cleveland running!
Post by: machoneman on April 08, 2015, 07:56:22 AM

Yes, it has that ripping silk Ferrari sound at/near 7,400!

Title: Re: Jay's next challenge: a V-12 Cammer! See a real V-12 Cleveland run on ther dyno
Post by: shady on April 08, 2015, 10:13:08 AM

wow, some guys can do anything. amazing. a dying art for sure.

Title: Re: Jay's next challenge: a V-12 Cammer! See a real V-12 Cleveland run on ther dyno
Post by: turbohunter on April 08, 2015, 11:12:36 AM

I've watched it a couple times now and it just cracks me up when he says "it's simple". :o

Title: Re: Jay's next challenge: a V-12 Cammer! See a real V-12 Cleveland run on ther dyno
Post by: Lenz on April 08, 2015, 12:31:19 PM

Yep, fantastic stuff.  Looks and sounds like it's ready to rip itself loose from its moorings.  Of course, it's just a couple of straight sixes married at the crank, right? :P 

The natural skills and vision of guys like that are getting harder and harder to find IMO.  I'll bet he drew this up in his mind, checked some dimensions to verify and just started cuttin'...

Title: Re: Jay's next challenge: a V-12 Cammer! See a real V-12 Cleveland run on ther dyno
Post by: shady on April 08, 2015, 12:49:27 PM

I have an old customer who can build anything. He's into steam & antique machinery, & says with a lathe, milling machine & a welder you can do anything. He is a high school dropout with no formal ed. It's called passion & I salute him.

Title: Re: Jay's next challenge: a V-12 Cammer! See a real V-12 Cleveland run on ther dyno
Post by: turbohunter on April 08, 2015, 12:57:02 PM

Quote from: Lenz on April 08, 2015, 12:31:19 PM

The natural skills and vision of guys like that are getting harder and harder to find IMO.  I'll bet he drew this up in his mind, checked some dimensions to verify and just started cuttin'...

I think that's part of what draws me to this hobby/pastime/life we all like.
There are some true genius's out here.
I marvel at the thought process's behind making horsepower and the artistry of cars.
Besides that, hawling ass is cool too! 8)

Title: Re: Jay's next challenge: a V-12 Cammer! See a real V-12 Cleveland run on ther dyno
Post by: Lenz on April 08, 2015, 01:52:45 PM

Quote from: shady on April 08, 2015, 12:49:27 PM

He's into steam & antique machinery, & says with a lathe, milling machine & a welder you can do anything. He is a high school dropout with no formal ed.

That's what I'm talking about (and "hawlin ass" too ;D  ;D. ) 

A guy realizes he's got certain skills, gets up off his hindquarters and goes out and develops them.  In the end he winds up being great at it, even the go-to guy but remains humble at the same time. 

The guys that are quietly good are the ones you can always learn something from.

Title: Re: Jay's next challenge: a V-12 Cammer! See a real V-12 Cleveland run on the dyno
Post by: Hemi Joel on April 08, 2015, 04:51:06 PM

How did he access all the areas where the 2 blocks needed to be welded together?

Title: Re: Jay's next challenge: a V-12 Cammer! See a real V-12 Cleveland run on the dyno
Post by: Lenz on April 08, 2015, 04:56:41 PM

Ever seen Lethal weapon, where the martial arts guy field strips the weapon pointed at him?  The classic line right after (IMO) delivered by Mel Gibson:  "How'd he do that?  Danny Glover, knowing he's about to get his ass kicked says, "let's go ask him................

Title: Re: Jay's next challenge: a V-12 Cammer! See a real V-12 Cleveland run on the dyno
Post by: cjshaker on April 09, 2015, 06:21:49 PM

Quote from: Hemi Joel on April 08, 2015, 04:51:06 PM

How did he access all the areas where the 2 blocks needed to be welded together?

All of the areas to be welded should be external. You would just be extending where  the water jacket and lifter valley are. The skirt is not an issue and nothing siamesed inside the block, so it wouldn't be hard to mate them with good machine work.