FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Tom Gahman on March 13, 2015, 08:16:44 PM

Title: 31 spline slip yoke
Post by: Tom Gahman on March 13, 2015, 08:16:44 PM

Is there a 31 spline slip yoke available that accepts the 1350 u joint for my Galaxie toploader?
I found several for the 1330 joint but none for the 1350.
I just built a new center section and I used the 1350 yoke, thinking I would upgrade
the driveshaft when I finished the transmission repairs(by next weekend).
Not the end of the world, I can use the 1350x1330 joint if I have to.
Just thought it would be stronger and less parts to keep track of.
Thanks for any help.

Title: Re: 31 spline slip yoke
Post by: jayb on March 13, 2015, 08:24:19 PM

I haven't checked, but I'll bet you could get one from one of the specialty driveline suppliers, like Mark Williams Enterprises or Moser...

Title: Re: 31 spline slip yoke
Post by: thatdarncat on March 13, 2015, 09:09:09 PM

Here's a couple:

http://www.markwilliams.com/detail.aspx?ID=309

http://www.markwilliams.com/detail.aspx?ID=333

http://www.iedls.com/Yokes/Custom-Quick-Release.asp

Title: Re: 31 spline slip yoke
Post by: Tom Gahman on March 13, 2015, 09:50:05 PM

Thanks for those links.
Are the c6 and top loader yokes interchangeable?
I found c6 yokes for the 1350 joint,but they don't mention the top loader.
Thanks again,Tom.

Title: Re: 31 spline slip yoke
Post by: thatdarncat on March 13, 2015, 10:15:52 PM

Yes, C6 is the same as the large output toploader.

Title: Re: 31 spline slip yoke
Post by: machoneman on March 14, 2015, 09:56:42 AM

Strange Engineering has'em too:

http://www.summitracing.com/search/brand/strange-engineering

Title: Re: 31 spline slip yoke
Post by: GJCAT427 on March 14, 2015, 03:04:05 PM

I built my 56 F100 with a 427 and a big in/out toploader and I remember getting my yoke from Dave Kee. Yes the c6 output is the same as the toploader.

Title: Re: 31 spline slip yoke
Post by: Tom Gahman on March 14, 2015, 06:05:43 PM

Thanks for all the links, not sure why I didn't come up with those.
All the toploader yokes that I have had seem longer than the c6 yokes,
though my current yoke is counter bored.
Thanks again.

Title: Re: 31 spline slip yoke
Post by: fairlanegt427 on March 15, 2015, 09:48:05 AM

i bought mine from strange engineering.  if i remember right it was 250 bucks.

Title: Re: 31 spline slip yoke
Post by: TomP on March 18, 2015, 01:53:59 PM

There were C6 1350 yokes in some F350's, for sure the mid 80's diesels. I've got no idea if they were slip or bolt on.

Title: Re: 31 spline slip yoke
Post by: Tom Gahman on March 18, 2015, 06:48:08 PM

Now that's something I didn't think of,Tom.
I'll try to remember that for the next time.
I found a local drive shaft shop and they are getting everything.
Thanks