FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Grbmaverickmo on July 10, 2014, 10:48:47 AM

Title: stall conv
Post by: Grbmaverickmo on July 10, 2014, 10:48:47 AM

Does anybody now what the stall is on a stock CJ c-6 torque converter??

Title: Re: stall conv
Post by: thatdarncat on July 10, 2014, 04:00:41 PM

The Ford shop manual for Mustangs, Torino's, etc will have the info at the end of the C6 section. It will also have the info for the I.D. markings, can use to verify an original converter. I don't have a '69 or '70 shop manual myself. My '68 shop manual is a early one, no CJ info. 427 Cougar with C6 shows 1750-1950 rpm. If I recall correctly highest stall on any stock Ford C6 back in the muscle car era was the 351 4V Clevelands.