FE Power Forums
FE Power Forums => FE Technical Forum => Topic started by: GTXtreme19 on June 24, 2014, 12:13:42 PM
-
Hi fellas and ladies,
I just bought a 68 Monterey 390 car for $800 (its not in my possession yet, don't want to drive 30 miles with a bad exhaust, and carb puking fuel.) Anyway back to the point, the passenger side exhaust manifold is cracked in 4-5 places. As much as I'd love to put some beefy headers on it I don't have the $500 to spend on them right now. So what are my options for the factory manifold? Will other vehicle manifolds fit it? What should I be looking for.
And for you picture whores
(http://rs810.pbsrc.com/albums/zz25/gtxtreme19/20140516_094704.jpg~320x480)
(http://rs810.pbsrc.com/albums/zz25/gtxtreme19/20140516_094649.jpg~320x480)
-
Hi
You could probably use them from
all Galaxies and Ltd,s with FE,s 65-
71I think
-
Finding a replacement manifold shouldn't be that difficult, but getting the old one off could be a pain. Expect that at least a couple of the top bolts with break off and need to be drilled out and retapped. The face of the exhaust flange may be eroded and may not seal well. I hate working on old rusty exhaust!
-
Thanks for the heads up fellas. I'll keep my eyes peeled. As far as the rust issue I've found a good spray of atf and acetone 1:1 mix works quite well on freeing up seized rusty bolts. My biggest concern is another area of the exhaust cracking when I remove the manifold