FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: JoeW on June 20, 2014, 12:32:41 PM

Title: Cammer Heads...How low can you go
Post by: JoeW on June 20, 2014, 12:32:41 PM

Jay

I know i said i would get the picture for you I just did not know it would take this long.
The heads finally came out of the safe when I had my camera.
So here is a picture of number 5

(http://i173.photobucket.com/albums/w51/tnlprt/shop22_zpsada7d776.jpg) (http://s173.photobucket.com/user/tnlprt/media/shop22_zpsada7d776.jpg.html)

Title: Re: Cammer Heads...How low can you go
Post by: JoeW on June 20, 2014, 12:36:05 PM

(http://i173.photobucket.com/albums/w51/tnlprt/shop20_zps6e2961f8.jpg) (http://s173.photobucket.com/user/tnlprt/media/shop20_zps6e2961f8.jpg.html)

Title: Re: Cammer Heads...How low can you go
Post by: TomP on June 22, 2014, 12:58:53 PM

Looking at those makes me wonder how the oil passages are routed. Complicated looking needing oil to all those cam bearings and the two rocker shafts. There must be several long oil passages.

Title: Re: Cammer Heads...How low can you go
Post by: jayb on June 23, 2014, 10:40:52 PM

There's only one long oil passage Tom, all the smaller passages are drilled to intersect that one.  Here are some pics of #3:

(http://fepower.net/Photos/Posts/number3_1.jpg)

(http://fepower.net/Photos/Posts/number3_2.jpg)