FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: bw_kc on June 05, 2014, 10:40:03 PM

Title: 428 Rotating Assembly - .030 over (crank/rods/pistons)
Post by: bw_kc on June 05, 2014, 10:40:03 PM

I've got a 428 (balanced) rotating assembly - hope to sell complete but will consider selling separately if I get no offers on the assembly.

 CRANK - 428 - CASTING - 1U - ADDITIONAL MARKINGS C RM010
 - .010 main and rod journals
 RODS - 428 - CASTING C7AE-B
 - Resized and reconditioned with ARP bolts
 PISTONS - TRW (SPEEDPRO FORGED) - PN: L2303NF
 - RINGS: COMP: (2)1.98mm OIL: (1)4.76mm
 - COMP DIST: 1.665"; PIN DIA: .9753"
 - 10.2:1 COMP RATIO (my setup)
 - RECESSED HEAD .120" DEEP (my setup)

 If you have a .030 over block or have a standard block to bore, this will be a great foundation for a build or rebuild.

 History: I had this assembly prep'd and balanced about 9 years ago - retains original 428 balance. About 5k miles on this setup - no track racing. Why am I selling - I am adding nitrous and want to upgrade to a rotating assembly that can withstand 700HP.

 $1,200 plus shipping. Can send pics upon request. 1st offer 1st served via email as I don't get to the forum that often these days. Will close ad when sold. Thx.

werner@oasispools.com
Werner Bartels
69 R code Mach 1

Title: Re: 428 Rotating Assembly - .030 over (crank/rods/pistons)
Post by: Hubble63 on July 31, 2014, 10:00:41 PM

whats your location

Title: Re: 428 Rotating Assembly - .030 over (crank/rods/pistons)
Post by: Hubble63 on August 14, 2014, 07:58:21 AM

hard too sell when there is no reply

Title: Re: 428 Rotating Assembly - .030 over (crank/rods/pistons)
Post by: BH107 on August 14, 2014, 01:26:42 PM

Quote from: Hubble63 on August 14, 2014, 07:58:21 AM

hard too sell when there is no reply

Did you try the email in the ad?

Also, if you look at the company the email address is for, they are in Kansas.