FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Hubble63 on April 19, 2014, 09:31:32 PM

Title: oil drip pan
Post by: Hubble63 on April 19, 2014, 09:31:32 PM

I got a blue thunder intake and now my rocker oil drip pan don't fit what do I do

Title: Re: oil drip pan
Post by: cjshaker on April 19, 2014, 10:19:54 PM

Well, first I would go to the "Technical Forum" on here and ask, instead of the classifieds ;)

Which intake? My unused Blue Thunder MR 2x4 is just like my factory MR intake, and I have my tins on it. So although I have not ran the Blue Thunder intake, I don't know why they wouldn't fit. Got any pictures? Sometimes they can be trimmed to work on new heads, sometimes they just have to be eliminated.

Title: Re: oil drip pan
Post by: Hubble63 on April 20, 2014, 07:37:44 AM

ya was tired last night .   its the cj medium rise intake hits the push rod holes.

Title: Re: oil drip pan
Post by: jayb on April 20, 2014, 07:54:20 AM

I moved it here.  It sounds like you have the long-finger drainback tins, which won't fit all intakes.  You can just trim the tins to fit, or get a set of the other style.

Title: Re: oil drip pan
Post by: Hubble63 on April 20, 2014, 07:57:45 AM

thanks jay .   I will trim them

Title: Re: oil drip pan
Post by: Hubble63 on April 21, 2014, 04:27:37 PM

 :) cut the pans about a inch .   fit in nice now next to the good looking blue thunder intake . now need to get a couple more fittings for h2o system and be off to the mud hole.