FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: Grbmaverickmo on March 26, 2014, 08:40:51 AM

Title: tall intake fitting
Post by: Grbmaverickmo on March 26, 2014, 08:40:51 AM

Could you guys help me out with the part number for the tall heater hose fitting in the intake my local parts store says its discontinued. Also the part number on intake gaskets that you guys have been having good luck with. Thanks  Chris

Title: Re: tall intake fitting
Post by: cjshaker on March 26, 2014, 09:15:59 AM

Can't help on part numbers, but almost any  Mustang supply place should have the tall fitting. Even if it's not a Mustang, they almost all have them in stock. Might try NPD, Mustangs Plus, Mustangs Unlimited or any one of 2 dozen other places out there. Finding the small stuff in local parts stores is getting to be nearly impossible anymore. After all, it's been 36 years since the engine was produced.

As for intake gaskets, I've gotten away from leak prone Felpro Print-O-Seals and gone to Mr Gasket. Part # would depend on style of head/intake port.

Title: Re: tall intake fitting
Post by: Grbmaverickmo on March 26, 2014, 02:14:03 PM

 Gaskets to put PI intake on my 390 gt heads. And ok I`ll see what glasiers or cj has or ebay maybe.