FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: Dryhoze1 on March 18, 2014, 11:34:35 AM

Title: Machine shop recommendation ?
Post by: Dryhoze1 on March 18, 2014, 11:34:35 AM

Hi all,
Any machine shop recommendations in the Orange, LA or San Diego area ?
Looking to have some Pro-Gram caps installed in a 428 block.
Thank you,
Brian

Title: Re: Machine shop recommendation ?
Post by: afret on March 18, 2014, 11:54:20 AM

This shop does machine work for several of the FE stock eliminator guys in So Cal like Richey Pauley and Don Keen.  They can install Pro Gram caps.  They are in Chatsworth in the SFV. From what I've seen, they are good at staying on schedule in getting work done.

http://www.qmpracing.com/

(http://i151.photobucket.com/albums/s156/oldafretired/DSC_0783_zps97ea848c.jpg)

(http://i151.photobucket.com/albums/s156/oldafretired/DSC_0791_zpsfae313ac.jpg)

Title: Re: Machine shop recommendation ?
Post by: turbohunter on March 18, 2014, 12:25:27 PM

Quote from: Dryhoze1 on March 18, 2014, 11:34:35 AM

Hi all,
Any machine shop recommendations in the Orange, LA or San Diego area ?
Looking to have some Pro-Gram caps installed in a 428 block.
Thank you,
Brian

They were recommended to me by afret and another local racer.
I just used them on a truck build and am very satisfied. Zero problems, great guys.
I have a 428CJ block there right now.

Title: Re: Machine shop recommendation ?
Post by: Dryhoze1 on March 19, 2014, 09:04:37 AM

Thanks for the info guys!!
Gave them a call yesterday & it's a go..
all the best,
Brian