FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: babybolt on February 06, 2014, 08:21:47 AM

Title: FS: 360 390 Rods
Post by: babybolt on February 06, 2014, 08:21:47 AM

Eight matching rods out of a running engine, came from a 360 or 361 truck engine.  I took one rod off the piston to measure the rod, it is nominally 6.5".  Some of the pistons may be reusable.  $50 plus shipping, box weighs 39 lbs.

(http://i134.photobucket.com/albums/q105/stuffnpics/ferods/ferods_zps8f4dc089.jpg) (http://s134.photobucket.com/user/stuffnpics/media/ferods/ferods_zps8f4dc089.jpg.html)

(http://i134.photobucket.com/albums/q105/stuffnpics/ferods/ferods-002_zps068bc6f5.jpg) (http://s134.photobucket.com/user/stuffnpics/media/ferods/ferods-002_zps068bc6f5.jpg.html)

(http://i134.photobucket.com/albums/q105/stuffnpics/ferods/ferods-005_zpsbed6e896.jpg) (http://s134.photobucket.com/user/stuffnpics/media/ferods/ferods-005_zpsbed6e896.jpg.html)

(http://i134.photobucket.com/albums/q105/stuffnpics/ferods/ferods-004_zps69a3f93f.jpg) (http://s134.photobucket.com/user/stuffnpics/media/ferods/ferods-004_zps69a3f93f.jpg.html)

Title: Re: FS: 360 390 Rods
Post by: drdano on February 06, 2014, 04:18:38 PM

PM Sent.

Title: Re: FS: 360 390 Rods
Post by: babybolt on February 08, 2014, 07:56:46 AM

I was intending on selling the rods and pistons together, not separated.  The tops of the pistons have the huge valley for low compression engines.

Title: Re: FS: 360 390 Rods
Post by: babybolt on February 13, 2014, 07:33:59 AM

Here's a picture of the top of one piston.  The pistons are 0.020 over.  Some have the scuffing above the top ring as you can see in the left hand side.

(http://i134.photobucket.com/albums/q105/stuffnpics/ferods/MVC-356L_zps10584600.jpg) (http://s134.photobucket.com/user/stuffnpics/media/ferods/MVC-356L_zps10584600.jpg.html)